Intelligent adjustment, simple and stable
Accuracy of detection and simplicity for the customer. Long-term stable brightness and reduced device maintenanc
Just one key to set, press the SET button when there is no target detection object, and press the SET button again when there is a target detection object to automatically set the optimal position
Dust cover
For easy observation, the dust cover is close to the display.
In the case of close range detection or detection of transparent objects or small objects, when the lighted level is saturated, the light projection amount by the sensor can be adjusted without changing the response time to realize stable detection. This function makes it easy to set up detection that previously required changes in response time and optical fiber
Two digital screens are convenient to use
Equipped with two digital screens, allowing you to check the base value, the light input amount, and various settings at the same time, making high operability
Wire lead type (standard with two meters of flexing-endurable cable) and connector type are availabl
Light amount value compensation
The automatic maintenance function restores the sensor to its original display state when it detects a decrease in brightness due to dirt or other reasons. This function eliminates the effects of the surrounding environment and enables the sensor to consistently perform high-precision detection.
Four methods of detection
Four detection modes are available: standard detection mode 1ms, high speed 250us, ultra-high speed 25us and high precision 16ms, which can also be used to detect small workpieces moving at high speed.
There are 3 types of timers available
Equipped with switch-on delay, disconnect delay and ONE SHOT timer. (Time of timer is about 1ms~10s)
ON delay：Delayed output of ON status after detection.
OFF delay：When the detection time is short and it is not possible to execute the detection through PLC. Maintains output of ON status
SHOT inching：Timed output is possible even if the size of the detected object is uneven
Differential detection mode
Measurements that used to be performed by multiple sensor and those for which it was difficult to set a base value can be realized.
Application examples
Detects presence of IC on the tray
Detection of small workpieces passing at high speed
